A105
A182
A210
A213
A249
A268
A269
A270
A312
A403
A554
A778
A815

A 269
Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service

Overview

1.1 This specification covers grades of nominal-wall-thickness, stainless steel tubing for general corrosion-resisting and low- or high-temperature service.

1.2 The tubing sizes and thicknesses usually furnished to this specification are 0.252 in. (6.4 mm) in inside diameter and larger and 0.020 in. (0.51 mm) in nominal wall-thickness and heavier.

1.3 Mechanical property requirements do not apply to tubing smaller than 1/8 in. (3.2 mm) in inside diameter or 0.015 in. (0.38 mm) in thickness.

1.4 Optional supplementary requirements are provided and, when one or more of these are desired, each shall be so stated in the order.

1.5 The values stated in inch-pound units are to be regarded as the standard.