| ALL STAINLESS LIMITED 21 Camford Way, Sundon Park Luton, Bedfordshire, LU3 3AN Telephone: 01582 584075 Facsimile: 01582 585234 mailto:info@allstainlessltd.co.uk |
|
Cleaning Stainless Steel FAQ's Stainless steel is an alloy of iron which contains more than 10% chromium. Stainless steel resists stains but occasionally dulls or will show oily finger prints. This steel is noted for its hardness and is used for utensils, tableware, sinks, counter tops, and small appliances. In the process of making it, a little of the chromium in the alloy is used to form the hard oxide coating on the surface. If this is taken off, through corrosion or wear, the steel rusts like regular steel. Olive
Oil: Rub stainless steel sinks with olive oil to remove streaks. Utensils: Do not let pans boil dry, or overheat on burner, which causes discoloration. Stainless steel pans on burners do not distribute heat evenly, and foods tend to stick in "hot spots", so careful stirring of foods is important. Pans with a copper bottom, or "sandwich" layer of aluminum or copper hidden in the bottom overcome this problem. Wash by hand or in dishwasher. If washed by hand, rinse well, and polish dry at once with soft dish towel to avoid spots and streaks. Dishwasher washing and drying do not leave these spots and streaks; occasionally a bluish cast develops which can be removed with silver polish. Some foods (acidic, salt, milk and milk products,) should be washed, or rinsed thoroughly off the surface of stainless steel promptly or else they tend to corrode it. Do not use harsh abrasives or steel wool on stainless steel. Cooked-on food or grease can be removed from stainless steel utensils by using a fine abrasive cleaning powder or a paste of baking soda and water, or a paste of ammonia and rotten stone. Commercial stainless steel cleaner is available. Sinks:
Perforated rubber or plastic mats in the sink will cut down on scratching
and marking by pans and tableware. Wash with a solution of hand dish washing
liquid detergent and water; or a solution of baking soda and water. Rinse
and polish dry with paper towel or soft cloth. Never use scouring powders
or steel wool as they will scratch stainless steel. You can brighten the
sink by polishing with a cloth dipped in vinegar, or in ammonia, or dampen
sink and a sponge; sprinkle a little baking soda on sponge and rub sink
gently; rinse. Then polish dry with paper towel. |
|
[
home ] [
ball
valves ] [ bsp
fittings ] [ hygienic
tube ] [ hygienic
tube fittings ] [ hygienic
unions ]
[ flanges ] [ metric tube and compression fittings ] [ nominal bore welded and seamless pipe ] [ nominal bore welded fittings ] [ other products ] |
Page last updated 15th June 2004